Eltham locals. Melbourne’s northern suburbs.Fully licensed & insured REC 25142
SAFETY

Blown fuse or tripped circuit breaker: what to do safely

4 min read · By Espire Electrical Solutions

If part of your home suddenly loses power, the cause is usually a circuit breaker that has tripped or, in older homes, a fuse that has blown. Both do the same job: they cut power to a circuit when too much current flows through it, so the wiring does not overheat. The safe approach is to switch off and unplug what was running on that circuit, reset a tripped breaker once, and call a licensed electrician if it trips again or if your switchboard still has old ceramic fuses.

Fuse, circuit breaker or safety switch?

Look at your switchboard before you do anything.

  • Circuit breakers are small switches in a row, each labelled for a circuit such as lights or power. A tripped breaker sits in the off or middle position.
  • Old ceramic fuses are white or brown plug-in holders. A blown fuse often looks no different from the outside.
  • Safety switches (RCDs) usually have a "test" button. They switch off when they detect electricity leaking to earth, which is a different problem; see our guide on a safety switch that keeps tripping.

Safe first steps

These steps only involve switching appliances off and using the switchboard as it is designed to be used. If anything feels unsafe, stop.

  1. Make sure your hands are dry and you are not standing on a wet floor.
  2. Switch off and unplug the appliances in the area that lost power.
  3. At the switchboard, find the breaker in the off or middle position. Push it fully off, then back on, once.
  4. If it stays on, plug appliances back in one at a time. If the breaker trips again when one goes back in, leave that appliance unplugged and have it checked.
  5. If your switchboard has ceramic fuses rather than breakers, do not open or repair them yourself. Call a licensed electrician.

Not sure what you’re looking at? Ask a licensed electrician.

0431 569 629

Why fuses blow and breakers trip

  • Overload: too many high-draw appliances on one circuit, such as a heater, kettle and microwave running together.
  • A faulty appliance: worn cords and appliances with heating elements are common causes.
  • A short circuit: damaged wiring or a faulty power point lets current take a path it should not. Our guide to short circuits explains the signs.
  • Ageing wiring and switchboards: older fuses and wiring were not designed for how much power a modern home uses.

When to stop and call an electrician

Call a licensed electrician instead of resetting again if:

  • the breaker trips straight away with everything on that circuit unplugged;
  • it keeps tripping with no clear pattern;
  • you notice a burning smell, buzzing, warm power points or scorch marks;
  • your switchboard still uses ceramic fuses;
  • the problem started after a storm, flood or leak.

Is it time to upgrade from fuses?

Old ceramic fuses do not offer the protection modern circuit breakers and safety switches give. If your home still relies on them, or the same circuit keeps cutting out, ask an electrician whether a switchboard upgrade makes sense. Our guide on how to tell if your switchboard needs upgrading covers the signs.

Frequently asked questions

Can I replace a blown fuse myself?

If your switchboard has ceramic fuses, have a licensed electrician deal with it. Resetting a tripped circuit breaker once, after unplugging appliances, is fine.

Why does the same breaker keep tripping?

Usually an overloaded circuit, a faulty appliance or a wiring fault. If unplugging appliances does not stop it, call a licensed electrician to test the circuit.

Is a tripped breaker dangerous?

The breaker tripping is doing its job. Repeated tripping is a warning that something on that circuit needs attention.

LET’S GET IT SORTED

Talk to a licensed electrician

Free quotes from Espire Electrical Solutions, based in Eltham. Fully licensed & insured, REC 25142.

Call 0431 569 629
FREE QUOTE, NO OBLIGATION

Tell us what you need.

Four quick details and Mardi gets back to you. No call centre, no obligation.

Rated 5.0 from 250+ Google reviews · Licensed & insured · REC 25142

Rather talk now? Call 0431 569 629

Your details are only used for your enquiry.

Call NowGet a Free Quote