Short circuits explained: causes, warning signs and prevention
A short circuit happens when electricity takes an unintended path with very little resistance, for example where an active wire touches a neutral or earth wire. Current rises sharply in a fraction of a second, which is why a circuit breaker trips or a fuse blows. That protection is doing its job, but the fault that caused it still needs to be found and fixed by a licensed electrician.
Warning signs of a short circuit
- A circuit breaker that trips or a fuse that blows as soon as something is switched on.
- A pop, crackle or spark from a power point, switch or appliance.
- Scorch or brown marks around a power point or switch.
- A burning or hot plastic smell.
- Lights flickering or dimming when an appliance starts.
What causes short circuits
- Damaged or worn appliance cords and plugs.
- Loose connections inside power points, switches or light fittings.
- Old or deteriorated wiring insulation, common in older homes.
- Water getting into outdoor power points, garden lighting or ceiling fittings after rain or a leak.
- Nails or screws driven into hidden cables during renovations.
- Pests chewing through cables in the roof space or under the floor.
Not sure what you’re looking at? Ask a licensed electrician.
0431 569 629Short circuit, overload or earth leakage?
- An overload is too much demand on a circuit and usually trips the breaker after a while, not instantly.
- A short circuit trips the breaker almost immediately.
- Earth leakage trips the safety switch rather than the breaker; our guide on a safety switch that keeps tripping covers that.
An electrician uses test equipment to tell them apart.
What to do if you suspect a short circuit
- Leave the tripped breaker off.
- Unplug appliances on the affected circuit.
- Do not open power points, switches or the switchboard.
- Call a licensed electrician. If the fault leaves you without power to essentials, use our emergency electrician page.
How to prevent short circuits
- Replace appliances with damaged cords instead of taping them.
- Keep outdoor power points covered and use outdoor-rated fittings.
- Have older wiring checked; an electrical safety inspection looks at the condition of the wiring, switchboard and safety switches.
- Before renovating, have an electrician locate cables in walls you plan to drill or cut.
Frequently asked questions
Can a short circuit fix itself?
No. If the breaker stays on after a reset, the faulty appliance may simply have been unplugged. A fault in the fixed wiring needs a licensed electrician.
Is a short circuit dangerous?
It can be. Short circuits can cause sparks, heat and fire, which is why breakers and fuses are designed to cut power quickly.
Will a safety switch protect me from a short circuit?
Circuit breakers and fuses protect against short circuits and overloads. Safety switches protect people against electric shock from earth leakage. Modern switchboards use both.
